CLUTCH SWITCH INSPECTION [MZR-CD (RF Turbo)]

id0140f1445400

Note

•  Perform the following test only when directed.

Continuity Inspection

1.  Disconnect the negative battery cable.

2.  Inspect continuity between the clutch switch terminals using an ohmmeter.

•  If the clutch switch is okay, perform the “Circuit Open/Short Inspection”

•  If not as specified, replace the clutch switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION.)

Specification

am3zzw00004203

am3zzw00004204

Circuit Open/Short Inspection

1.  Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)

2.  Inspect for open/short circuit in the following wiring harnesses.

•  If there is open/short circuit, repair or replace wiring harnesses.

am3zzw00004205

Open circuit

•  Clutch switch terminal A and PCM terminal 109

•  Clutch switch terminal B and body ground

Short circuit

•  Clutch switch terminal A and power supply

•  Clutch switch terminal A and body ground

•  Clutch switch terminal B and power supply