STARTER REMOVAL/INSTALLATION[MZ-CD 1.6 (Y6)]

id0119b3800200

Warning

•  When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the negative battery cable before performing the following operation.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION[MZ-CD 1.6 (Y6)].)

2.  Disconnect the negative battery cable.

3.  Remove the battery box, battery clamp, battery and battery tray. (See BATTERY REMOVAL/INSTALLATION[MZ-CD 1.6 (Y6)].)

4.  Remove the fuel filter protector. (See FUEL FILTER REMOVAL/INSTALLATION[MZ-CD 1.6 (Y6)].)

5.  Set the fuel filter out of the way.

6.  Remove the bolt A from the upper side of the engine.

7.  Remove the under cover.

8.  Remove the vacuum chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION[MZ-CD 1.6 (Y6)].)

9.  Remove in the order indicated in the table.

10.  Install in the reverse order of removal.

am3zzw00001550

1	Terminal B cable
2	Terminal S connector
3	Starter