DTC P0607 [MZR-CD (RF Turbo)]

id0102f1809500

DTC P0607

PCM performance problem

DETECTION CONDITION

•  PCM internal malfunction.

Diagnostic support note

•  MIL does not comes on.

•  PENDING CODE is available if PCM detects the above malfunction condition.

•  FREEZE FRAME DATA is not available.

•  DTC is stored in PCM memory.

POSSIBLE CAUSE

•  PCM internal malfunction

DTC P0607	PCM performance problem
DETECTION CONDITION	• PCM internal malfunction. Diagnostic support note • MIL does not comes on. • PENDING CODE is available if PCM detects the above malfunction condition. • FREEZE FRAME DATA is not available. • DTC is stored in PCM memory.
POSSIBLE CAUSE	• PCM internal malfunction

Diagnostic procedure

STEP	INSPECTION		ACTION
1	VERIFY FREEZE FRAME DATA HAS BEEN RECORDED • Has FREEZE FRAME DATA been recorded?	Yes	Go to the next step.
1		No	Record FREEZE FRAME DATA on repair order, then go to the next step.
2	VERIFY RELATED REPAIR INFORMATION AVAILABILITY • Check for related service repair information availability. • Is any related repair information available?	Yes	Perform repair or diagnosis according to available repair information. • If vehicle is not repaired, go to the next step.
2		No	Go to the next step.
3	VERIFY TROUBLESHOOTING OF P0607 COMPLETED • Make sure to reconnect all disconnected connectors. • Clear DTC from PCM memory using the M-MDS. • Start the engine. • Is same DTC present?	Yes	Replace the PCM, go to the next step. (See PCM REMOVAL/INSTALLATION [MZR-CD (RF Turbo)].)
3		No	Go to the next step.
4	VERIFY AFTER REPAIR PROCEDURE • Perform “AFTER REPAIR PROCEDURE”. (See AFTER REPAIR PROCEDURE [MZR-CD (RF Turbo)].) • Is any DTC present?	Yes	Go to applicable DTC inspection. (See DTC TABLE [MZR-CD (RF Turbo)].)
4		No	Troubleshooting completed.