SIDE STEP MOLDING REMOVAL/INSTALLATION

id091600801800

1.  Remove the fasteners.

am3zzw00002310

2.  While cutting the double-sided adhesive tape using a flathead screwdriver or a razor, separate the side step molding from the body.

Warning

•  Using a razor with bare hands can cause injury. Always wear gloves when using a razor.

3.  Pull the side step molding outward, then disengage clips A from the body.

4.  Slide the side step molding towards the front of the vehicle and remove clips B from the side step molding.

am3zzw00002311

5.  Remove the side step molding.

6.  Install in the reverse order of removal.

(1)  Attach double‐sided adhesive tape to the side step molding as shown in the figure.

am3zzw00002312