NO.24 ENGINE STALLS WHEN SHIFTED TO D, M RANGES, OR IN R POSITION[FN4A-EL]

id0503a1808700

24

Engine stalls when shifted to D, M ranges, or in R position

DESCRIPTION

• Engine stalls when shifting from N or P position to D, M ranges or R position at idle.

POSSIBLE CAUSE

• The malfunction is on the engine control side (i.e. IAC system/Electronic throttle control system). Otherwise, the malfunction is in the input/turbine speed sensor (engine sometimes starts) or the TCC circuit (engine always stalls).

Diagnostic procedure

STEP	INSPECTION		ACTION
1	Go to symptom troubleshooting No.10 “LOW IDLE/STALLS DURING DECELERATION”. (See NO.10 LOW IDLE/STALLS DURING DECELERATION[ZJ, ZY, Z6].) (See NO.10 LOW IDLE/STALLS DURING DECELERATION[LF, L3].) Is the engine control system normal?	Yes	Repeat the basic inspection and repair or replace any malfunctioning parts according to the inspection result. (See BASIC INSPECTION[FN4A-EL].)
1		No	Repair or replace any malfunctioning parts according to the inspection results.
2	• Verify the test results. ― If normal, return to the diagnostic index to service any additional symptoms. ― If the malfunction remains, inspect the related Service information and perform repair or diagnosis. • If the vehicle is repaired, troubleshooting is completed. • If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM.

24	Engine stalls when shifted to D, M ranges, or in R position
DESCRIPTION	• Engine stalls when shifting from N or P position to D, M ranges or R position at idle.
POSSIBLE CAUSE	• The malfunction is on the engine control side (i.e. IAC system/Electronic throttle control system). Otherwise, the malfunction is in the input/turbine speed sensor (engine sometimes starts) or the TCC circuit (engine always stalls).