STARTER REMOVAL/INSTALLATION [MZR-CD (RF Turbo)]

id0119f1800200

Warning

•  Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury.

•  When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the negative battery cable before performing the following operation.

Note

•  The following procedure “STARTER REMOVAL/INSTALLATION” is performed from below the vehicle.

1.  Disconnect the negative battery cable.

2.  Remove the under cover.

3.  Remove the harness bracket.

4.  Remove in the order indicated in the table.

5.  Install in the reverse order of removal.

am3zzw00003884

1	Terminal B cable
2	Terminal S connector
3	Starter