FUEL PUMP RESISTOR REMOVAL/INSTALLATION [L3 Turbo]

id0114b4801200

1.  Remove the battery cover. (SeeBATTERY REMOVAL/INSTALLATION [L3 Turbo].)

2.  Disconnect the negative battery cable.

3.  Remove the air cleaner. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)

4.  Disconnect the fuel pump resistor connector.

am3zzw00003469

5.  Remove in the fuel pump resistor.

6.  Install in the order as shown in the figure.

am3zzw00003470

Tightening torque
7.8—11.8 N·m {80—120 kgf·cm, 70—104 in·lbf}

7.  Connect the fuel pump resistor connector.