 |
am3zzw00002500
RADIATOR REMOVAL/INSTALLATION[LF, L3]
id0112b5801400
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the under cover.
4. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT[LF, L3].)
5. Disconnect the coolant reservoir hose from the radiator.
6. Position the front wiring harnesses out of the way.
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
9. Add engine coolant.(See ENGINE COOLANT REPLACEMENT[LF, L3].)
10. Inspect for engine coolant leakage. (See ENGINE COOLANT LEAKAGE INSPECTION[LF, L3].)
am3zzw00002500
|
|
1
|
Fan control module connector
|
|
2
|
Cooling fan component
|
|
3
|
Radiator lower hose
|
|
4
|
Radiator upper hose
|
|
5
|
Radiator mount
|
|
6
|
Radiator
(See Radiator Removal Note.)
(See Radiator Installation Note.)
|
Cooling Fan Component Removal Note
1. Unlock lower side tabs a at two points by pressing the cooling fan side tabs, remove upper side tabs a at two points, then remove the cooling fan component from the radiator.
am3zzw00002501
|
Radiator Removal Note
1. Remove the condenser from the radiator with the pipes still connected, by pressing the radiator side tabs to unlock tabs b on the condenser.
am3zzw00002502
|
2. Remove rubber mount A from the mount installation hole.
am3zzw00002503
|
3. Tilt the radiator to the engine side.
4. Remove rubber mount B from the mount installation hole.
5. Remove the radiator from below.
Radiator Installation Note
1. Install the condenser to the radiator by aligning lower side tabs b with the radiator side tabs, install upper tabs b, then install lower side tabs b.
am3zzw00002504
|
2. Install the radiator.
Cooling Fan Component Installation Note
1. Insert tabs a to the radiator to install the cooling fan component.
am3zzw00002501
|
